Fabric Applications
The coating lines we build for fabric and technical textiles, and the units they are composed of.
Accumulator
The accumulator stores fabric on the fabric coating line, holding a buffer between its sections. Its purpose is to absorb roll changes and speed differences between infeed and outfeed, so the coating and drying section runs non-stop at constant speed. Request a Quote
Blackout Coating Line
Line that applies the opaque blackout coating to curtain fabric as a stable foam with a knife, built from an unwinder, a J-box, a padder, a weft straightener, a COALIS coating machine, stenter drying, a calender and finishing units. Request a Quote
Tarpaulin Coating Line
Tarpaulin and technical-textile combined coating line at 3400 mm working width, with combined knife-over-air / knife-over-roll coating, a 6-chamber 18 m electric dryer and a 40-tonne water-cooled smoothing calender. Request a Quote
COALIS Fabric Coating Machine
Knife coating machine with a chrome-plated back cylinder, doctor and floating knives, independent right and left gap setting and a frequency-inverter AC drive; working width and the other technical requirements are met according to the requirements of the line it will run on. Request a Quote
Smoothing Calender
Designed to improve fabric surface smoothness and appearance, our smoothing calenders provide uniform pressure and consistent finishing results. Engineered for reliable performance, they enhance fabric quality, surface uniformity and finishing efficiency across a wide range of textile applications. Request a Quote
Padder
Designed for efficient and uniform liquid application and removal, our squeezing padders ensure excellent wet pick-up control, consistent fabric treatment and high process efficiency. Engineered for reliable performance, they are suitable for a wide range of textile wet-processing applications. Request a Quote
Apparel Technical Textile Coating
Coating line that gives denim, jacket and footwear fabrics water repellency, water- and windproofing, breathability and handle through coating and lamination. Request a Quote
Edge Trimming
Edge trimming unit that cuts the edge of coated fabric on the line to give an even, constant width. Request a Quote
Conveyor Belt Coating
Coating line applying PVC/PU coating, lamination and an embossed surface profile to the carrier fabric of conveyor belts, with units designed to the belt type. Request a Quote
Fabric / Denim Coating
PVC knife-coating line with gas/IR drying that gives woven and knitted fabric functional properties such as flame retardancy, waterproofing, stain repellency and abrasion resistance. Request a Quote
Drying System (RAM / Dryer Machine)
RAM (Stenter) Designed for precise heat setting, width control and dimensional stabilization, our stenter machines ensure uniform fabric treatment and consistent finishing quality. Engineered for high performance, energy efficiency and reliable operation across a wide range of textile applications. Dryer Machine Our textile drying machines provide efficient and uniform moisture removal, ensuring consistent drying quality and reliable process performance. Designed for energy efficiency and flexible operation, they are suitable for a wide range of textile drying applications. Request a Quote
Lacquering Line
Lacquering is the finishing process that applies a thin lacquer layer to the surface of PVC-coated fabric. Gloss, surface protection and handle are set by this layer: the face can be finished glossy or matt, holds less dirt and cleans easily, and lasts longer against UV and weathering. Lacquered PVC-coated fabric is the choice for products that spend years outdoors, such as truck and lorry tarpaulins, awnings, tents and tensile membrane roofs. Request a Quote
Outdoor Technical Textile Coating
Coating line that gives workwear, bag, umbrella and military clothing fabrics waterproofing, flame retardancy and abrasion resistance. Request a Quote
Synthetic Leather and Coagulation Coating
Line producing synthetic leather on a base fabric by three-head transfer coating on release paper with lamination, or by coagulation (wet process), with units designed to your product. Request a Quote
Unwinder
The unwinder carries and unwinds the raw fabric roll at the head of the fabric coating and lamination line. Its purpose is to feed the fabric into the line crease-free and at constant tension, so the coating is applied evenly along its whole length. Request a Quote